Bosch D282A-DH Replacement Duct Smoke Detector Head (24 VDC) - Photoelectric - Fire Detection - Bone White - TAA Compliance D282A-DH

Bosch D282A-DH Replacement Duct Smoke Detector Head (24 VDC) - Photoelectric - Fire Detection - Bone White - TAA Compliance

The D282A-DH Replacement Duct Smoke Detector Head detects the large smoke particles which typically result from wood, paper, and fabric combustion. It is a conventional 24 VDC photoelectric smoke detector head for use with the D300A and D300A-HV conventional duct detector housing units. It uses an infrared (IR) LED light source and a silicon photo diode to measure light reflected from particulates in a detection chamber. After two consecutive measurements exceeding the threshold level, the unit signals an alarm condition. The detection chamber, designed for reliable smoke entry characteristics, is protected by a micro-fine insect screen to minimize nuisance alarms. The sensitivity stability and high signal-to-noise ratio of this detector permits its use in a wide range of environmental conditions. The detector head has a moisture-proof reed switch that reacts to an external magnet for testing. The magnet test simulates a 4% to 6% smoke obscuration, which places the detector in an alarm condition. This test is especially useful in environmentally unstable or clean areas. There are built-in LEDs that flash to indicate the unit is powered. The LEDs latch on steady in an alarm condition.

Technical Specifications:
Sensing Technology: Photoelectric
Detectable Medium: Fire
Status Indicators: LED, Alarm
Input Voltage: 33 V DC
Product Color: Bone White
Package Contents:

D282A-DH Repalcement Detector Head, 1 x Literature Pack

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: